Products
-
Carbon erw steel pipe For Chinese Factories
Outer Diameter: 21.3mm-610mm (1/2″-24″)
Wall Thickness: 1mm-22mm
Length: 0.5mtr-20mtr
End: square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled,
Surface:Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy,Fusion Bond Epoxy, 3-layers PE -
Sucker Rod For Chinese Factories
Steel sucker rod is important equipment for oil field.sucker rod is produced based on C, D, K grade according to API Spec 11B，which is also our leading products.
-
Oil Well Casing Tube Manufacturer
Specifications of oil well casing
Dimension range(OD inch)：4 1/2”—30”
Dimension range(OD mm)：114.3—762
Standard: API SPEC 5CT , ISO11960, GOST
Length: R1, R2, R3
Main Steel Grade: H40, J55, K55, N80-1, N80-Q, L80-1,L80-9Cr, L80-13Cr, P110, Q125 etc
Type of Casing：Plain, BTC, STC, LTC, Other Premium Thread.
-
High-Quality Casing Pipes Wholesale
Specifications of oil well casing
Dimension range(OD inch)：4 1/2”—30”
Dimension range(OD mm)：114.3—762
Standard: API SPEC 5CT , ISO11960, GOST
Length: R1, R2, R3
Main Steel Grade: H40, J55, K55, N80-1, N80-Q, L80-1,L80-9Cr, L80-13Cr, P110, Q125 etc
Type of Casing：Plain, BTC, STC, LTC, Other Premium Thread.
-
High-Quality API 5CT P110 Casing tubes
Outer diameter
4 1/2″, 5″, 5 1/2″, 6 5/8″, 7″, 7 5/8″, 9 5/8″, 10 3/4″, 13 3/8″, 16″, 18 5/8″, 20″, 30″
Wall thickness
5.21 – 16.13 mm -
API 5CT OCTG tubing Manufacturer
API 5CT OCTG tubing is the conduit used to transport crude oil or natural gas from the producing formations to the field surface facilities for processing after drilling is completed. During the extraction process, the OCTG tubing must withstand the pressure and it must be adequately strong to resist loads and deformations associated with production and workovers. In addition, tubing generally is sized to satisfy the expected rates of production of oil and gas. That is because if tubing is too large, we will have an economic impact beyond the cost of tubing oil and gas itself, however, if API tubing is too small, it will restrict the production of oil or gas, and if things continue this way it will impact subsequent economic performance of the well. Generally, tubing is manufactured in the same way as casing, except an additional process known as “upsetting” which is applied to thicken the pipes.
-
API 5CT N80 Casing tubes
Outer diameter
4 1/2″, 5″, 5 1/2″, 6 5/8″, 7″, 7 5/8″, 9 5/8″, 10 3/4″, 13 3/8″, 16″, 18 5/8″, 20″, 30″
Wall thickness
5.21 – 16.13 mm -
High-Quality API 5CT L80 Casing tubes
Outer diameter
4 1/2″, 5″, 5 1/2″, 6 5/8″, 7″, 7 5/8″, 9 5/8″, 10 3/4″, 13 3/8″, 16″, 18 5/8″, 20″, 30″
Wall thickness
5.21 – 16.13 mm -
API 5CT K55 Casing pipes Manufacturer
API 5CT K55 Casing Tubing serves to transport both crude oil and natural gas from oil and gas layer to the surface pipeline after drilling is completed. It is able to bear the pressure produced by the exploitation process. After the outer surface is coated with a protective layer, the tubing is marked in accordance with the API 5CT standard and strapped with metal belt.
K55 oil casing use:
For oil well drilling, it is mainly used to support the shaft wall during drilling and after completion to ensure the normal operation of the drilling process and the whole well after completion. -
API 5CT J55 Casing pipes Manufacturer
API 5CT J55 Oil casing:
J55 Oil casing is a steel pipe used to support the wall of oil and gas wells to ensure the normal operation of the entire oil well during the drilling process and after completion. Each well requires several layers of casing depending on different drilling depths and geological conditions. After the casing is run down, cement cementing is required. It is different from the tubing and drill pipe and cannot be reused.
API 5CT J55 Casing Tubing Specification:
J55 API casing or tubing is a relatively common one in oil drilling. Because of the low steel grade of J55, it is used for shallow oil and gas extraction.The J55 API casing or tubing is widely used in the extraction of natural gas and coalbed methane, and can be commonly found in shallow wells, geothermal wells, and water wells.
